EX-2C Low VOC Colour Coat

Endura EX-2C Low VOC colour coat is a VOC compliant formula that meets or exceeds the Canadian Automotive refinishing guidelines for VOC levels in colour coats.

EnduraEX-2C Low VOC Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.

- High gloss and color retention
- Outstanding resistance to chemicals, abrasion & impact
- A library of over 40,000 colors
- Color matching service available
- Available in: High and reduced gloss, Pearl, Metallic and Candied finishes

Application information - EX-2C v.s. EX-2C Low VOC

	EX-2C	EX-2C Low VOC
Spraying Viscosity	12 seconds	1 - 1.5 seconds less than EX-2C 10.5 to 11 seconds
Sag Resistance	2 - 3 wet mils	4 - 5 wet mils
Thinning		Up to 12% with Endura Medium Topcoat reducer* *Up to 90F and 50% RH then use slow reducer
Mixing	1:1	1:1
Spray Equipment and setup	Same	Same
Paint Application	It is recommended that a thinner first layer be applied at 1.0-1.5 mils. Allow 30-45 minutes between coats.	Apply two wet coats, heavier first coat followed up by a lighter second coat with 30 minutes flash off between coats. The new solvent system in the EX-2C Low VOC is much faster than regular EX-2C. The heavier first coat allows for better flow and improved surface finish.

Product Overview
Service Conditions	Heavy Duty Topcoat
Recommended DFT	1.5-2.5 mils DFT
Volume Solids (%)	46%
Recommended Sector	Oilfield, Aviation, Marine, Fleet, Automotive, OEM, Architectural
VOC	< 323 grams/liter (2.69 lbs/gal) for all colours

can Additional Product Information EX-2C Low VOC Technical Data Sheet
MSDS Component A
MSDS Component B
Quickstart Application Guide

Additional LanguagesEX-2C Low VOC Fiche de données (Francais)